Also Check and Double-Check the compass direction. Naturally, the Latitude and Longitude must be entered in the correct format: Degrees, Minutes, Seconds. When adding GPS reference points to an Ekahau Project, extra special care should be taken when entering the co-ordinates. When planning a GPS survey consider downloading the most recent version of the application. The GpsGate installer that comes bundled with Ekahau may not always be the latest version. “GpsGate Splitter” (new name for the Franson GpsGate application) bridges the communication between a compatible GPS receiver and another application by converting the GPS feed into a virtual COM port. To end your Survey right click on the map. You can now walk you desired survey path. The label will change to “GPS Record On”. Once you are happy that the Blue Dot does indeed represent your real-world location, you can go-ahead and start collecting survey data. If your map is calibrated correctly you should appear on the map as a small blue dot. Or use a platform like Google Maps/Earth to discover the GPS coordinates of 3x specific points on your map. Then make your way over to landmark-2 add another reference point and repeat one final time. Set your survey gear up, physically make your way to landmark-1, add a GPS reference point using the coordinates reported by your GPS hardware. 
You have two options when it comes to the source for the GPS data:
Franson gpsgate alternative windows full#
To get the full “Blue Dot” Experience within Ekahau you will need to import, scale and “calibrate” your map by adding “GPS Reference Points”! Import your map and set the scale in the usual way – using the scale tool You should add 3x GPS reference points, ideally 300 metres (1000 feet) from each other, NOT arranged in a straight line! If you see a warning triangle, hover the mouse cursor over it to view the warning message
0 kommentar(er)
